The Original Phone Grip
egrips® Technology's Patented, protective, gecko-like, anti-skid, silicone material, solves slippery situations around the home, office, car, boat, plane ... land, air & sea!
- Stays Clean
- Made in USA
- Designed to grip
- Not Magnetic or Sticky
- Easily applied and cleanly removable!
egrips® Non-Slip Material has an extremely high coefficient of friction and a very low-profile. The patented anti-skid material can be used in an endless number of applications beyond handheld electronic devices, helping to make life easier, safer and more precise.
egrips® material is a soft elastomer. Similar to high performance tires, the more friction that is applied to the material, the faster it wears.
egrips® Skins & Kits perform magically on any dry surface. Universal Kits meet almost any need and the large 4.75" x 9.5" Sheet that can be cut with a sharp pair of scissors.
Current combinations of egrips Material and Adhesive:
- Clear Dimpled w/ Semi-Permanent Adhesive (0.5mm thick)
For the DIYer and die-hard egrips fan - Universal configurations of raw material with the strongest adhesive we have to offer. Adhere to flat surfaces only. Endless applications!
- Clear Dimpled w/ Cleanly Removable Adhesive (0.5mm thick)
Device Specific Skins (iPhone and Galaxy) and Universal Rectangles meant for mobile phones and their protective cases ... crystal clear allowing designs and logos to show through. Adhere to flat surfaces only.
- Printed Dimpled w/ Cleanly Removable Adhesive ( 0.5mm thick)
Adhere to flat surfaces only ... will not stick to curved surfaces. Colorful Skins and Universal products for mobile devices, protective cases, power banks, external hard drives, wallets, etc.
- Clear Wavy HD (Heavy Duty) w/ Semi-Permanent Adhesive (1mm thick)
For the DIYer, but these Large strips of raw Heavy Duty material really shine on Tablets and Laptops. The 1mm deep wavy grooves allow your fingers to dig in and securely hold your device. Adhere to flat surfaces only.
- Clear Wavy HD (Heavy Duty) w/ Cleanly Removable Adhesive (1mm thick)
For the DIYer ... Create non-slip / anti-skid surfaces. Adhere to flat surfaces only.
Semi-Permanent vs Cleanly Removable / Repositionable Adhesive?
The raw egrips material is produced with a strong adhesive that we market as "Semi-Permanent". It can leave a little residue behind when removed from devices, but it's easy to clean it off with an alcohol wipe. This adhesive bonds strong to most smooth surfaces, so it works great in DIY projects, especially for smaller pieces of material that have little surface area to make a strong a bond.
The Cleanly Removable adhesive was designed to be repositioned, but not washed and re-used. When it is carefully peeled off a device, it can be reapplied, as long as the adhesive isn't compromised with dust and dirt. If you pick at a corner and bend it, it will not lay back down flat, no matter which adhesive.
To produce egrips products with this gentler adhesive, the raw grip material is laminated to a clear (or printed) label stock that contains the "cleanly removable" adhesive. Because the raw material adhesive is stronger than the one on the label stock, the 2 layers don't separate / delaminate.
We introduced the Cleanly Removable adhesive with the iPhone 6, and now use it for all expensive device specific skins and parts that may be used on other expensive phones and cases. It adheres well to most surfaces.
Soft-touch matte finishes, like many remote controls are painted with, have become more prevelant in the mobile accessory world. These rubberized paints are meant to repel fingerprints, and naturally are hard to adhere to. The Semi-Permanent adhesive is better suited in these applications.
Get a Grip on your slippery gadgets with egrips Anti-Slip Skins & Kits!
- Not Magnetic or Sticky ... amazing gripping action is Magical!
- Stays securely in your hand, on your dash ... virtually anywhere!
- Prevents damaging drops ... prolongs life of your investment!
- Easily applied and cleanly removable ... leaves no residue!
- Won't absorb dirt or oils and is easily cleaned with a damp cloth!
- Patented material dramatically enhances the device's feel!
- Ultra-thin material does not prohibit the use of a case or clip!
- Most Advanced anti-skid surface in the world ... simply amazing!
World's Most Advanced Non-Slip Material
When people first come in contact with egrips technology material, their most common reactions are, "What is this stuff?" ... "Is it Magnetic?" ... "How is it so sticky?" ... "Can I put it on my kids?"."This Stuff" is not magnetic, nor is it sticky, but the amazing performance of egrips® Technology Material is nothing short of magical!
Made from a specially formulated, patent pending, dimpled silicone elastomer, the material has an extremely high coefficient of friction, which prevents devices from sliding around on dry surfaces, like car seats, center consoles, counter tops, desktops, laptops and even your shirt sleeve.
Why companies choose egrips® Technology Material
- Outperforms any non-skid material on the market today!
- Crystal Clear color for an instant color match, with unlimited color possibilities.
- Lower Profile than current materials on the market which means more versatility
- Can be combined with product labels to provide an anti-skid pad and a label in one piece
- Replaces Santoprene® and other TPRs (Thermo Plastic Rubbers) by eliminating injection molding expenses, providing a better grip, and allowing for multi-color logos/graphics.
- Does not collect dirt and is easily cleaned
- egrips® material is a soft elastomer. Similar to high performance tires, the more friction that is applied to the material, the faster it wears.
Some Applications for egrips® Technology material
|THIN PROFILE FEET:
-Inside Circumference of Exercise Hoops
-Bottom of Magnetic Mounted GPS Antennae
-On Battery Door Cover to Facilitate Opening by pressing with Thumb
Provides a comfortable feel when used as the overlaminate on a flat membrane keyboard (used on a stenographic keyboard)